Sansui Flat Panel Television HDLCD4060 User Guide

OWNER’S MANUAL  
GUIDE D’UTILISATION  
40” CLASS LCD HDTV  
HDTV ACL CATÉGORIE 40 PO  
HDLCD4060  
ATTENTION  
ATTENTION  
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the  
required programming code.  
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),  
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-  
respondant au téléviseur.  
AIR/CABLE MODE SELECTION  
SÉLECTION DU MODE AIR/CABLE  
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.  
If not using Cable TV, set this menu option to the “Air” position.  
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous  
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».  
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED  
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.  
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE  
DU NUMÉRO DE MODÈLE AVANT D’APPELER.  
CUSTOMER SERVICE – 1-800-289-0980  
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980  
ORION WEBSITE  
SITE WEB ORION  
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,  
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT  
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,  
OU LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:  
Before operating the unit, please read this manual thoroughly.  
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.  
 
IMPORTANT SAFETY INSTRUCTIONS  
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as  
vases, should not be placed on the apparatus.  
16) An outside antenna system should not be located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from touching such power lines or  
circuits, as contact with them might be fatal.  
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points  
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into  
the unit.  
19) If an outside antenna or cable system  
is connected to the unit, be sure the  
antenna or cable system is grounded  
to provide some protection against  
voltage surges and built-up static  
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE  
ANTENNA LEAD IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
charges, Section 810 of the National  
Electrical Code, ANSI/NFPA 70, provides  
information with respect to proper  
grounding of the mast and supporting  
structure, grounding of the lead-in  
wire to an antenna discharge unit, size  
of grounding conductors, location of  
antenna discharge unit, connection to  
ELECTRIC SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
grounding electrodes, and requirements for the grounding electrode.  
 
3 EN  
IMPORTANT SAFETY INSTRUCTIONS  
20) When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety  
checks to determine that the unit is in proper operating condition.  
22) When you connect the product to other equipment, turn off the power and unplug all of the  
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal  
injury. Read the owner's manual of the other equipment carefully and follow the instructions when  
making any connections.  
23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones,  
(if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use  
headphones continuously with high volume sound, it may cause hearing damage.  
24) Do not allow the product to output distorted sound for an extended period of time. It may cause  
speaker overheating and fire.  
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the  
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close to the point of cable entry as  
practical.  
26) The socket-outlet must be installed near the unit and easily accessible.  
CHILD SAFETY:  
It Makes A Difference How and Where You Use Your Flat Panel Display  
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:  
THE ISSUE  
The home theater entertainment experience is a growing trend and larger flat panel displays are popular  
purchases. However, flat panel displays are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations.  
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,  
chests or carts may fall over and cause injury.  
THIS MANUFACTURER CARES!  
The consumer electronics industry is committed to making home entertainment enjoyable and safe.  
TUNE INTO SAFETY  
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of  
your flat panel display.  
Carefully read and understand all enclosed instructions for proper use of this product.  
Don’t allow children to climb on or play with furniture and television sets.  
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.  
Remember that children can become excited while watching a program, especially on a “larger than life” flat  
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or  
knocked down.  
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be  
pulled or grabbed by curious children.  
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:  
Use a mount that has been recommended by the display manufacturer and/or listed by an independent  
laboratory (such as UL, CSA, ETL).  
Follow all instructions supplied by the display and wall mount manufacturers.  
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about  
professional installation.  
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/  
product and wall mount. If you are unsure, contact a professional installer.  
A minimum of two people are required for installation. Flat panel displays can be heavy.  
 
EN 4  
IMPORTANT SAFETY INSTRUCTIONS  
CONDENSATION  
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm  
room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired.  
To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure  
that the room temperature rises gradually.  
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In  
such cases, change the location of the unit.  
HOW TO HANDLE THE LCD PANEL  
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.  
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause  
skin inflammation.  
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your  
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.  
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for  
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but  
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your  
LCD Panel on for long periods of time while it is displaying the following formats or images:  
• Fixed images, such as stock tickers, video game patterns, TV station logos, and websites.  
• Special formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on  
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a  
widescreen (16:9) display (black bars on left and right sides of screen).  
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any  
responsibility for these symptoms.  
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes  
parts of the screen may be missing picture elements or have luminous spots.  
This is not a sign of a malfunction.  
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some  
equipment placed too near this unit may cause interference.  
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless  
headphones.  
SAFETY PRECAUTIONS  
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.  
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 4 inches  
(10 cm) free space around the entire unit.  
4 inches  
4 inches  
Notes when mounting the TV on a wall  
If the unit is to be mounted on the wall, contact the retailer where you  
purchased the TV for advice, and have the equipment professionally  
installed. Incomplete or improper installation may cause injury to you,  
and/or damage to the TV.  
Bracket holes:To attach a wall mounting bracket (not supplied) attach  
where indicated in the drawing right.  
Bracket holes  
This manufacturer recommends professional installation.  
Utilize an appropriate bracket and fasteners, sufficient to  
accommodate the size and weight of the unit.  
Assure the wall to which the unit is to be mounted will safely support  
the size and weight of the unit, using the bracket and fasteners you  
have selected.  
Keep cords and cables connected to this flat panel display out of  
reach of children.  
To hang the television on a wall, remove these screws and then  
remove a stand. Before performing work spread cushioning over the  
base area to lay the TV on.  
Screws  
Before wall-mounting, please check carefully the location of the TV’s  
mounting-holes.  
 
5 EN  
How to attach the stand  
NOTE:  
• Unplug the AC cord from the AC INPUT terminal.  
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any  
damage to the unit.  
• Do not touch or press the TV-screen, glass might break under pressure.  
Place the TV on its front onto a table.  
Align the stand’s bottom-plate (supplied) as seen here.  
It will fit in only one direction.  
Hold the unit and attach the stand frame (a) slowly and secure the stand frame (a) with the 3 screws  
(supplied). (4x35mm(5/32x1-23/64 inches)), as shown in gure 1.  
(b)  
LCD PANEL SIDE  
(a)  
(b)  
Figure 1  
Figure 2  
Finally secure the bottom-plate (b) with 3 screws (supplied) (4x12mm(5/32 x 15/32 inches)) as indicated by the  
arrows in figure 2.  
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support  
your unit correctly, and could result in damage or injury from tip-over.  
How to remove the stand  
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To  
remove the stand, perform these steps in reverse order.  
For wall mounting, the base must be removed. To disconnect the base/stand remove the 3 screws from the back  
(see page 5).  
Warning  
To prevent injury, which could be expected due to an  
eventual fall, the TV must be fixed to the ground  
according to instruction (see right image).  
Fix to the appropriate ground with the supplied screw.  
NOTE:  
• There is no liability for any damage to the ground.  
 
EN 6  
Features  
• Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.  
• Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for  
hearing impaired viewers.  
• Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control  
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.  
• Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to  
240 minutes to turn off automatically.  
• V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is  
encoded with this information. V-Chip will allow you to set a restriction level.  
• Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby  
Digital sound can produce the effect of being in a movie theater or a concert hall.  
• HDMI/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component can  
be connected to this unit.  
• On-Screen 3 Languages Display - You can select one of 3 languages, English, French or Spanish for on-  
screen programming.  
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of  
Dolby Laboratories.  
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or  
registered trademarks of HDMI Licensing LLC in the United States and other countries.  
Power source  
TO USE AC POWER  
1.Connect the AC cord plug into this unit’s AC INPUT jack.  
2.Connect the AC cord into an AC outlet.  
AC outlet  
Wider Hole  
and Blade  
AC 120V, 60Hz  
AC cord (supplied)  
NOTE:  
• Please make sure to insert the cord securely at both the LCD TV and the wall outlet.  
• The AC cord has a polarized type AC line plug. If the supplied AC cord does not match your AC outlet, contact  
a qualified electrician.  
WARNING:  
• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC  
CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.  
• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. THIS COULD CAUSE  
FIRE, ELECTRICAL SHOCK, OR DAMAGE.  
CAUTION:  
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF  
SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.  
• DO NOT PLUG/UNPLUG THE AC CORD WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL  
SHOCK.  
• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS  
RECOMMENDED. CONTACT CUSTOMER SERVICE AT 1-800-289-0980.  
 
7 EN  
Contents  
Before using your unit  
IMPORTANT SAFETY INSTRUCTIONS...........3  
SAFETY PRECAUTIONS .................................5  
How to attach the stand ....................................6  
How to remove the stand ..................................6  
Features............................................................7  
Power source....................................................7  
Contents ...........................................................8  
Parts and functions ...........................................9  
Remote control ...............................................10  
Antenna connections ......................................11  
Cable TV connections.....................................11  
Connections to other equipment.....................12  
TV operation  
Starting setup .................................................15  
TV operation ...................................................15  
Quick guide for menu operation......................16  
Convenience functions ...................................17  
Channel setup.................................................20  
Labeling channels...........................................21  
Setting the Lock..............................................21  
Closed Caption...............................................23  
CC options......................................................23  
Aspect Ratio ...................................................24  
Media Playback ..............................................25  
Additional information  
Reception disturbances ..................................27  
Troubleshooting ..............................................28  
Specifications ................................................29  
limited WARRANTY ........................................30  
 
EN 8  
Parts and functions  
Front  
Left Side  
POWER button  
CH (CHANNEL)  
/
//buttons  
VOL (VOLUME)  
+/–//buttons  
MENU button  
INPUT/ENTER button  
Power Indicator  
Red: Standby  
Green: On  
To display the menu screen.  
Press MENU button to display the menu screen.  
CH (CHANNEL)  
/
buttons, VOL (VOLUME)  
Remote sensor  
+/buttons and INPUT/ENTER button can be used  
to select the desired setting during the menu screen  
operations.  
Rear  
Left Side  
ANT. (RF) IN jack  
PC MONITOR IN jack  
PC/DVI AUDIO IN jack  
HDMI/DVI1/2 IN jacks  
USB INPUT  
HEADPHONE jack  
AC INPUT jack  
DIGITAL AUDIO  
COAXIAL OUT jack  
COMPONENT IN jacks (Y/Pb/Pr)  
AUDIO OUT jacks  
VIDEO IN jacks  
(VIDEO/AUDIO (L/R))  
 
9 EN  
Remote control  
6.CURSOR ///Buttons Use to operate the  
-
12  
13  
menu functions of the TV.  
1
2
7.ENTER Button - Use to enter or select  
information for On-Screen operations.  
8.MUTE Button - To turn off the sound, press this  
3
button once. The TV will be silenced and the  
symbol  
will appear on the screen. The muting  
4
5
14  
15  
feature can be released by pressing the MUTE  
button again or one of the VOL (VOLUME) + / –  
buttons.  
9.VOL (VOLUME) + / Buttons - Press the +  
button to increase, or the button to decrease the  
sound level.  
6
7
16  
8
10.INPUT SELECT Button - Use to change the  
external input.  
11.CCD Button - Use to select Closed Caption to  
17  
18  
9
“CC Off”, “CC On” or “CC on Mute”.  
10  
11  
12.SLEEP Button - To set the TV to turn off after a  
preset amount of time, use the SLEEP button on  
the remote control.  
13.PICTURE SIZE Button - Use to change the  
picture size.  
1. (POWER) Button - Use to turn the power on/off  
14.RECALL Button - This button allows you to go  
back to the previous channel selected by just  
pressing the RECALL button. Press this button  
again to return to the channel you were watching.  
to the TV.  
2.DISPLAY Button - When you press this button,  
the current information will be displayed on a  
screen. To remove the display from the screen,  
press this button again.  
15.EXIT Button - Press to remove setup menu.  
16.AUDIO Button - Change soundtrack language.  
3.Direct Channel Selection Buttons (0-9) - Allows  
direct access to any channel of the TV.  
17.CH (CHANNEL)  
/
Buttons - To change the  
channels of the TV.  
4.Button -This button is used when selecting  
digital channels.  
18.USB Media control buttons - See page 25.  
5.MENU Button - Use to display the On-Screen  
menu function.  
Before using the remote control, batteries must first be installed.  
HOW TO INSTALL BATTERIES  
1. Open the battery compartment cover.  
Use two “AAA” size batteries. The batteries may last  
approximately one year depending on how much the  
remote control is used. For best performance, it is  
recommended that batteries should be replaced on a  
yearly basis, or when the remote operation becomes  
erratic. Do not mix old and new batteries or different  
types.  
BATTERY PRECAUTIONS  
2. Install two “AAA” batteries (supplied).  
3. Replace the battery compartment cover.  
These precautions should be followed when using  
batteries in this device:  
• Use only the size and type of batteries specified.  
• Be sure to follow the correct polarity when  
installing the batteries as indicated in the battery  
compartment. Reversed batteries may cause  
damage to the device.  
• Do not mix different types of batteries together  
(e.g. Alkaline, Carbon-zinc or Rechargeable) or old  
batteries with fresh ones.  
• If the device is not to be used for a long period of  
time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
• Do not try to recharge batteries not intended to be  
recharged; they can overheat and rupture. (Follow  
battery manufacturer’s directions.)  
 
EN 10  
Antenna connections  
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your  
antenna system. If you are using a Cable TV service, see “Cable TV connections”.  
Combination VHF/UHF Antenna (Single 75 ohm cable)  
Connect the 75 ohm cable from the combination  
Antenna  
VHF/UHF antenna to the Antenna Jack.  
Jack  
75 ohm  
Coaxial  
Cable  
Cable TV connections  
This TV has an extended tuning range and can tune most cable channels without using a Cable TV  
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.  
Descrambling these signals for normal viewing requires the use of a descrambler device which is  
generally provided by the Cable TV company.  
For subscribers to basic Cable TV service  
For basic Cable TV service not requiring a Converter/  
75 ohm  
Descrambler box, connect the 75 ohm Coaxial Cable directly  
Coaxial  
Cable  
Antenna  
Jack  
to the Antenna Jack on the back of the TV.  
For subscribers to scrambled Cable TV service  
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect  
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial  
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the  
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel  
3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohm  
Cable TV  
Cable  
Antenna  
Jack  
75 ohm Cable to TV  
Converter/  
Descrambler  
For subscribers to unscrambled Cable TV service with scrambled premium channels  
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require  
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available  
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the  
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the  
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the  
Converter/Descrambler box to tune scrambled channels.  
Incoming  
Converter/  
75 ohm  
Cable TV  
Cable  
Antenna  
Jack  
Descrambler  
75 ohm Cable to TV  
A
A/B Switch  
Splitter  
B
 
11 EN  
Connections to other equipment  
The exact arrangement you use to interconnect various video and audio components to this unit is dependent  
on the model and features of each component. Check the Owner’s Manual provided with each component for  
the location of video and audio inputs and outputs.  
To connect the TV to a VCR  
Rear of the unit  
VCR  
To Video/Audio OUT  
Video/Audio cord (not supplied)  
To VIDEO/AUDIO IN  
To connect the TV to a DVD player with Component Video Input  
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD  
player with the component video cables (not supplied).  
Rear of the unit  
To COMPONENT IN  
To Component OUT  
Y
Y
Pb  
Pr  
To AUDIO IN  
Component video cord  
(not supplied)  
Pb  
Pr  
DVD  
Audio cord (not supplied)  
To Audio OUT  
NOTE:  
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and  
480p/720p progressive signals.  
To connect the TV to a camcorder, or a game console  
To playback from a camcorder, connect the camcorder to the unit as shown.  
This unit can also be used as a display device for many video games. However, due to the wide variety of  
signals generated by these devices and subsequent hook-up variations required, they have not all been  
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for  
additional information.  
Rear of the unit  
To VIDEO/AUDIO IN  
To Video/Audio OUT  
GAME CONSOLE  
or  
Video/Audio cord (not supplied)  
 
EN 12  
Connections to other equipment  
To connect an audio system  
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the  
TV’s remote control.  
Amplifier  
Rear of the unit  
To AUDIO (L/R) OUT  
To Audio (L) Input  
To Audio (R) Input  
Audio cord (not supplied)  
NOTE:  
To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set  
above 0 (zero).  
• For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the  
amplifier is at its highest level.  
Using an AV Amplifier with built-in digital surround  
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including  
Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.  
Front  
Speaker  
(Right)  
Rear of the unit  
Subwoofer  
TV  
Front  
Speaker  
(Left)  
To DIGITAL AUDIO  
COAXIAL OUT  
Coaxial digital cable  
(not supplied)  
To Coaxial  
Center Speaker  
Digital Audio Input  
Surround  
Speaker (Left)  
Surround  
Speaker  
(Right)  
AV Amplifier with built-in digital surround decoder  
NOTE:  
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.  
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.  
 
13 EN  
Connections to other equipment  
To connect a HDMI or a DVI device to the unit  
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital  
video from a DVI device.  
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate  
analog audio cords required.  
Left of the unit  
To PC/DVI AUDIO IN  
To DVI output  
Audio cord (not supplied)  
HDMI - to - DVI adapter cable  
(HDMI type A connector)  
DVI device  
(not supplied)  
To HDMI IN  
or  
HDMI device  
HDMI cable (type A connector)  
(not supplied)  
To HDMI output  
NOTE:  
• When using HDMI/DVI1/2 IN to connect your HDMI or DVI devices, you must select the  
corresponding audio input source (HDMI or DVI) on the menu screen. Otherwise you will only see  
the image with no sound.  
To connect the TV to a PC (Personal Computer)  
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S  
RESOLUTION AND REFRESH RATE (60 HZ).  
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA  
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In  
case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to  
the AUDIO IN connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable.  
If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect  
audio cord as same way as VGA cable.  
Press INPUT SELECT on the remote control to select PC mode.  
Switch on the computer. The TV can operate as the computer monitor.  
Left of the unit  
Monitor Display modes  
Mode  
Resolution Refresh rate  
To PC MONITOR IN  
VGA  
VGA  
640x480 60/ 75 Hz  
720x400 70Hz  
VGA cable (not supplied)  
To PC/DVI  
AUDIO IN  
SVGA  
XGA  
WXGA  
SXGA  
800x600 60/ 75 Hz  
1024x768 60/ 70/ 75 Hz  
1360x768 60Hz  
Audio cord (not supplied)  
HDMI cable (not supplied)  
1280x1024 60Hz  
To HDMI IN  
WXGA+ 1440x900 60Hz  
WSXGA+ 1680x1050 60Hz  
FHD  
1920x1080 60Hz  
To return to normal mode  
Press INPUT SELECT again.  
NOTE:  
• The on-screen displays will have a different appearance in PC mode than in TV mode.  
• If there is no video signal from the PC when the unit is in PC mode, “No Signal” will appear on the TV-screen.  
• When the PC connected to the HDMI terminal and 1920x1080 resolution (FHD) is selected, the top and  
bottom, right and left edges of the picture may be hidden on all picture sizes. In this case, use the PC  
MONITOR IN jack (VGA cable) is recommended to connect.  
• When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal,  
which has been confirmed operational on this TV, may appear depending on the PC used. In this case, “Auto”  
or other Position Adjustment functions may fail to correct the image position.  
To solve this problem, change the PC settings to select another resolution.  
 
EN 14  
Starting setup  
TV operation  
The Setup Wizard menu appears the first time  
you turn on the TV, and assists you to specify the  
Air/Cable setting, and program your channels  
automatically.  
To turn on the TV, press POWER. (POWER  
1
indicator on the front of the unit changes green.  
It may take approx. 10 seconds for a picture to  
appear on screen.)  
Adjust the volume level by pressing VOL + or .  
IMPORTANT: Make sure that the antenna or cable  
TV system connection is made!  
2
The volume level will be indicated on the screen  
by brown bars. As the volume level increases, so  
do the number of bars. If the volume decreases,  
the number of brown bars also decreases.  
To turn on the TV, press POWER. (POWER  
1
indicator on the front of the unit changes green.  
It may take approx. 10 seconds for a picture to  
appear on screen.) The Setup Wizard function  
begins.  
Set the signal type option to the appropriate  
3
4
position (see “Air/Cable selection” on page 20).  
Press the Direct Channel Selection (0-9, )  
Setup Wizard  
buttons to select the channel.  
(If you press only channel number, channel  
selection will be delayed for a few seconds.)  
Menu Language  
TV Location  
Go to next step  
English  
Store  
TO SELECT ANALOG CHANNELS  
1-9:  
Press 1-9 as needed. Example, to  
select channel 2, press 2, then press  
ENTER.  
Press or to select “Menu Language”, then  
2
3
press or to select desired language.  
10-99:  
Press the 2 digits in order. Example,  
to select channel 12, press 1, 2, then  
press ENTER.  
Press or ENTER  
.
Press or to select “Store” or “Home”. This  
product qualifies for ENERGY STAR In Home  
mode default setting. Then press or ENTER.  
100-135: Press the 3 digits in order. Example, to  
select channel 120, press 1, 2, 0, then  
press ENTER.  
NOTE:  
TO SELECT DIGITAL CHANNELS  
Press the first 1-3 digits, then press the button,  
followed by the remaining number.  
• This unit has been preset to STORE  
brightness.This setting does not qualify  
under ENERGY STAR.To reduce brightness  
and energy consumption, change setting  
to ‘HOME’.This setting does qualify under  
ENERGY STAR.  
Example, to select channel 15-1, press 1, 5, , 1,  
then press ENTER.  
• If a channel is selected with only audio content,  
“Audio Only” will be displayed on the screen.  
• If a channel is selected with a weak digital  
signal, “No Signal” will be displayed on the  
screen.  
Press or ENTER to go to next step.  
4
5
Press or to select your time zone, then  
press or ENTER.  
The same program may be available on either  
an analog channel or a digital channel.You may  
choose to watch either format.  
• In the rare event that you live within broadcast  
range of two stations in two different time  
zones, the TV may recognize the wrong  
station for the auto clock set.  
VHF/UHF/CABLE CHANNELS  
Air  
Cable  
Press or to select daylight saving time on  
6
7
or off, then press or ENTER.  
VHF  
VHF  
2-13  
2-13  
Press or to select desired time format, then  
press or ENTER.  
UHF  
STD/HRC/IRC  
14-69  
14-36  
(A) (W)  
Press or ENTER to go to next step.  
Press or to select “Air/Cable”, then press  
or to select signal type that you using, then  
press or ENTER.  
8
37-59  
60-85  
86-94  
95-99  
(AA) (WW)  
(AAA) (ZZZ)  
(86) (94)  
9
(A-5) (A-1)  
Press or ENTER to go to next step.  
100-135 (100) (135)  
10  
11  
01  
(4A)  
Auto Scan will begin. After tuning is completed,  
the TV channel appears on the screen.  
• Depending on the reception condition, it  
may take up to 30 minutes to complete  
memorizing digital cable channels. Please  
allow the process to complete without  
interruption.  
NOTE:  
If a channel with no broadcast is selected, the sound will  
automatically be muted.  
It may take a few seconds for a digital channel picture to  
appear on screen after being selected.  
To select the video input source  
To view a signal from another device connected  
to your TV, such as a VCR player, press INPUT  
SELECT, then press or , then press ENTER.  
NOTE:  
If you press MENU or EXIT in the process of “Auto Scan”,  
the Auto Scan stops and changes to normal screen.  
When you make a menu selection, your changes occur  
immediately.You do not have to press MENU to see your  
changes.  
 
15 EN  
CH  
/
Quick guide for menu  
operation  
Press and release CH  
/
. The channel  
automatically stops at the next channel set into  
memory.  
For proper operation, before selecting channels, they  
should be set into the memory. See “Channel setup”  
on page 20.  
Call menu and for example: Select Menu Language.  
Press INPUT SELECT to select TV mode.  
1
DISPLAY  
Press MENU. The TV menu screen will appear.  
Press DISPLAY to display the current information on  
2
the screen.  
Picture  
Sound  
Time  
Setup  
Standard  
Lock  
Channel  
When the TV receives a digital signal, the digital  
information will appear.  
Picture Mode  
Brightness  
Contrast  
Color  
50  
50  
50  
50  
50  
Monoscope_480i_1  
Service1  
CC  
SD  
15-1  
CH-1  
TV-14-D  
480i Audio 2/3  
Tint  
Sharpness  
2013/01/01 17:10 17:00-17:30  
Good  
Color Temperature  
Advanced Settings  
Normal  
3_ARTE_Monosco_0820_0000_0030_Audio6_ABCDEFGHIJKLMNOPQ  
RSTUVWXYZabcdefghijklmnopqrstuvwxyz_ABCDEFGHIJKLMNOPQR  
STUVWXYZabcdefghijklmnopqrs  
TUVWXYZabcdefghijklmnopqrs  
tuvwxyz_ABCDEFGHIJKLMNOPQRS  
Press or to select “Setup”, then press .  
3
4
• Channel number  
• DTV Signal condition  
Press or to select “Menu Language”, then  
press or to select the desired language.  
…on the following pages the menu can be called  
in the same way as here.  
• Channel label (if preset) Broadcast program name  
• V-Chip rating  
• Program guide  
• Resolution  
• Current date and time  
• Audio language  
• Closed Caption  
Press MENU to return to the previous screen.  
5
Press DISPLAY again to clear the call display.  
NOTE:  
NOTE:  
• If no buttons are pressed for more than about 30  
(depending on your setting) seconds, the menu  
screen will return to normal operation automatically.  
• After a few seconds, DISPLAY screen will return to  
normal TV operation automatically.  
SLEEP  
To set the TV to turn off after a preset amount of time,  
press SLEEP on the remote control. The clock will  
change for each press of the SLEEP button (Off, 5  
min, 10 min, ..., 240 min).To confirm the sleep timer  
setting, press SLEEP and the remaining time will  
be displayed for a few seconds. To cancel the sleep  
timer, press SLEEP repeatedly until the display turns  
to Off.  
 
EN 16  
Convenience functions  
You can change the default settings by pressing the MENU button on your remote, then select the one of the  
icons at the top of the menu - follow the On-Screen prompts to set your preferences.  
Icon  
Selected Items  
Setup hint  
Picture  
Picture Mode  
Power Saving  
The darker the brightness for power-saving  
Standard picture quality  
Bright and dynamic picture  
Soft edge picture setting  
Standard  
Dynamic  
Soft  
User  
Your personal preferences  
Brightness  
Contrast  
Color  
You can adjust the picture quality to your preference.  
• Available only when you selected “User”.  
• “Tint” is available only in Analog TV and AV mode.  
Tint  
Sharpness  
Color Temperature  
Advanced Settings  
Aspect Ratio  
Cool (Bluish) / Normal (Neutral) / Warm (Reddish)  
See page 24.  
Noise Reduction  
To set the level of decreasing noises included in the video  
signal.  
Medium / High / Off /  
Low  
DBC  
Use this feature to change the Black level automatically  
according to the brightness of an image. The Black level will  
become dark in a dark scene. If “ECO” is selected, the power  
consumption is reduced.  
Off / ECO / On  
• DBC is not available in Media mode.  
DLC  
DLC (Dynamic Luminance Contrast) function would adjust  
the luminance follow the average brightness automatically  
Off / On  
HDMI Mode  
Video / Graphic  
MFC Level  
Off / Low / Medium /  
High  
Select the HDMI input signal as Video (for video) or Graphic  
(for PC).  
To change the setting of motion enhancement. A smoother  
motion may be obtained by this setting.  
• MFC Level is not available in HDMI, PC and Media mode.  
 
17 EN  
Convenience functions  
Icon  
Selected Items  
Setup hint  
Sound  
Equalizer Settings  
Equalizer Mode  
Standard / Music /  
You can choose a basic equalizer mode. Depending on this  
setting, the following detail setting is set to default value of  
each mode.  
Movie / Sports  
User  
150 / 500 / 1K / The setting of this item adjusts the audio level of its fre-  
5K / 10K Hz  
quency corresponding to each setting.  
• Available only when you selected “User”.  
Balance  
Adjust the left and right sound channel volume.  
MTS  
The multi-channel TV sound (MTS) feature provides high-  
fidelity stereo sound. MTS also can transmit a second audio  
program (SAP) containing a second language or other audio  
information. This item is valid only when the analog broad-  
cast.  
Stereo / SAP / Mono  
Audio Language  
English / French / Spanish  
Digital Audio Output  
Raw / Off / PCM  
Surround Sound  
When two or more audio languages are included in a digital  
signal, you can select one of the audio language. (This func-  
tion is available only for digital broadcast.)  
Select the format for your digital audio output If you have  
connected an amplifier / receiver to the digital audio jack on  
your TV.  
The dynamic presence and sound created offers a thoroughly  
enjoyable listening experience.  
Off / On  
AVL  
Volume level can be adjusted automatically by the sound  
level.  
Off / On  
Time  
Sleep Timer  
Off / 5 / 10 / 15 / 30 / 60 / 90 /  
120 / 180 / 240 min  
Time Zone  
Sleep timer switches the TV to standby after a defined period  
of time.  
To cancel the Sleep Timer, set to “Off”.  
Select your local time zone for auto clock feature.  
You can select Newfoundland, Atlantic, Eastern, Central,  
Mountain, Pacific, Alaska, Hawaii and Samoa.  
Daylight Saving Time  
Off / On  
If you want to activate the daylight saving time, select “On”.  
Time Format  
12-hour / 24-hour  
Auto Clock  
Select the time format.  
The Auto clock function will automatically set the built-in  
clock (Year, Month, Day and Time) when the TV is connected  
to an antenna or cable TV system and it is turned off. As  
the TV searches for a receivable station in your area and it  
receives a broadcast signal for Auto Clock, the Auto Clock  
needs several minutes to set itself.  
Off / On  
Clock  
Using the ///, the setting value is changed.  
• Available only when you selected “Auto Clock” to “Off”.  
 
EN 18  
Convenience functions  
Icon  
Selected Items  
Setup hint  
Setup  
Menu Language  
English / Français / Español  
You can choose from three different languages (English,  
Français (French) and Español (Spanish)) for the on-screen  
displays.  
Select the language you prefer first, then proceed with the  
other menu options.  
OSD Timeout  
5 / 15 / 30 / 45 / 60 Sec.  
Closed Caption  
Over Scan  
Off / On  
Input Label  
You can set the display time of OSD Menu.  
See page 23.  
To adjust the size of the display by removing excess or  
unattractive when set it to”On”.  
The Input Label feature allows you to label each input source  
for your TV.  
Default / Antenna / Cable /  
You can select label from default value or input by yourself  
with /(alphabet select) / /(select character / position).  
Satellite / DTV / DVD / Blu-ray /  
HD-DVD / XBOX / Wii / PS3 /  
Game / Computer / VCR / DV /  
Custom (10 characters)  
PC Settings (available only for PC mode)  
H-Pos  
V-Pos  
Clock  
Phase  
Auto  
To adjust the horizontal placing of the image.  
To adjust the vertical placing of the image.  
Eliminates the vertical (CLOCK) interfering lines.  
Eliminates the horizontal (PHASE) interfering lines.  
To adjust the all PC settings automatically.  
Other Settings  
Audio Only  
Off / On  
You can turn off the picture on your TV and listen to the pro-  
gram audio only.  
To exit audio only mode, press any buttons (except VOL +/-,  
MUTE) on your remote control or unit.  
TV Location  
Store / Home  
Select location of TV. Usually, select “Home”.  
Restore Default  
No / Yes  
Select “Yes”, then press ENTER. Restore Picture, Sound and  
Time (Sleep Timer and Time Format only) (except “Menu  
Language”) settings to the default factory settings.  
Setup Wizard  
See page 15.  
See page 21.  
See page 20.  
Lock  
Channel  
 
19 EN  
receive a list based on your address or zip code.  
Should you require further assistance you may call  
our toll-free customer service line at 1-800-289-0980.  
• New digital channels may be added to your area  
periodically, it is recommended to perform the “Auto  
Channel setup  
This TV is equipped with a channel memory  
feature which allows channels to skip up or down  
to the next channel set into memory, skipping  
over unwanted channels. Before selecting  
channels, they must be programmed into the  
TV’s memory. To use this TV with an antenna,  
set the signal type option to the Air mode. When  
shipped from the factory, this menu option is in  
the Cable mode.  
3Scan” procedure regularly.  
The new channel will be added into the channel  
memory.  
Show/Hide channel  
You can select the channel that you want to skip.  
Air/Cable selection  
Select “Channel Show/Hide”, then press or  
1
2
ENTER.  
Select “Channel Air/Cable”.  
1
Press or to select the channel that you want  
Press or to select “Air” or “Cable”.  
2
to skip.  
Air - VHF/UHF channels  
Cable - CABLE TV channels  
Picture  
Sound  
Time  
Setup  
Lock  
Hide  
Channel  
Channel  
Channel Label  
4-0  
7-0  
12-0  
23-2  
23-3  
23-77  
23-999  
Picture  
Sound  
Time  
Setup  
Cable  
Lock  
Channel  
Air/Cable  
CH-2  
CH-3  
CH-77  
Auto Scan  
Channel List  
Show/Hide  
Channel Number  
Channel Label  
CH-999  
23  
CH-2  
Prev  
Next  
1/1  
Press ENTER to assign mark for unwanted  
P
3
4
channel.  
NOTE:  
Repeat steps 2 - 3 for other channels you want to  
show/hide.  
• It may take a few seconds for a digital channel  
picture to appear on screen after being selected.  
Auto Scan  
Select “Channel Auto Scan”, then press or  
1
ENTER.  
Picture  
Sound  
Time  
Setup  
Lock  
Channel  
Are you sure to Auto  
Scan?  
No  
Yes  
In confirmation window, Press to select “Yes”,  
then press ENTER. The TV will begin memorizing  
all the channels available in your area.  
• It may take from 15 minutes to 30 minutes to  
complete memorizing digital cable channels.  
Depending on the reception condition, a bar  
display may not advance for several minutes,  
please be patient.  
2
• If you press MENU during search, digital  
channel search will stop.  
NOTE:  
Memorizing channels is best accomplished during  
evening “PRIMETIME” hours, as more stations are  
broadcasting digital signals. Memorizing channels can  
only be accomplished while a station is broadcasting  
a digital signal to set that channel into memory.  
• If you are unsure of the digital channels available  
 
EN 20  
Labeling channels  
Setting the Lock  
Channel label appear with the channel number  
display each time you turn on the TV, select a  
channel, or press DISPLAY.  
An age limitation can be set to restrict children from  
viewing or hearing violent scenes or pictures that  
you may choose to exclude. The restriction applies to  
“TV” and “MPAA” if this data is transmitted.You may  
set this restriction separately. To use the  
You can choose any 7 characters to identify a  
channel.  
Lock function, you must register a password.  
To create channel labels  
To register a password  
Select “Channel Channel Number”.  
1
Select “Lock”, then press .  
1
Press or to select a channel you want to  
2
Press 0000 using Number buttons(0-9). (This is  
2
label, then press to select “Channel Label”.  
default password.)  
Then press or ENTER.  
Picture  
Sound  
Time  
Setup  
Lock  
Channel  
Picture  
Sound  
Time  
Setup  
Cable  
Lock  
Channel  
Enter Password  
Air/Cable  
Auto Scan  
Channel List  
Show/Hide  
Channel Number  
Channel Label  
” appears instead of the number.  
23  
CH-2  
NOTE:  
• If you forget the password, contact Customer  
Service at 1-800-289-0980 for assistance.  
Your original remote control will be required.  
To avoid forgetting the password, write it down and  
keep in a safe place.  
Press or repeatedly until the character you  
3
want appears in the first space.  
Picture  
Sound  
Time  
Setup  
Lock  
Channel  
How to enter the Lock menu  
Select “Lock” menu, then press .  
1
C
H
3
Use Number buttons (0-9) to enter your  
2
password.  
If the character which you desire appears, press .  
You can also change the position which input  
To Lock connected devices  
character by pressing or ▶  
.
In the Lock menu, press or to set “System  
1
2
Repeat this step to enter the rest of the characters.  
Lock” to “On”.  
Repeat steps 1-3 for other channel.You can  
assign a label to each channel.  
4
5
Press or to select “Input Block”, then press ▶  
or ENTER.  
When you finish inputting the label name, press  
EXIT to return to the normal screen.  
Picture  
Sound  
Time  
Setup  
UnBlock  
Lock  
Channel  
NOTE:  
TV  
• The channel labels will be reset after “Auto Scan” on  
page 20.  
AV  
UnBlock  
UnBlock  
UnBlock  
UnBlock  
UnBlock  
UnBlock  
Component  
HDMI1  
HDMI2  
PC  
Media  
Press or to select which device will be  
3
blocked, then press or to select “Block”.  
NOTE:  
• Blocked device will appear in Source Select  
window. Enter your password before watching.  
If you want to use such a device again, you should  
setting “UnBlock” in step 3.  
 
21 EN  
To set the Lock  
Enter a current password using Number buttons  
2
3
4
(0-9).  
In the Lock menu, press or to set “System  
1
Lock” to “On”.  
Enter a new password using Number buttons  
(0-9).  
Press or to select “US Rating”, then press ▶  
2
3
or ENTER.  
Enter the same password again to confirm.  
The password is now registered.  
Press or to select which rating will be used,  
then press or ENTER. Each rating below will  
Downloading the additional Lock rating system  
As a supplement to the standard Lock rating system,  
your television will be able to download an additional  
rating system, if such a system becomes available in  
the future.  
appear.  
TV Rating  
Picture  
Sound  
Time  
Setup  
S
Lock  
Channel  
TV Rating  
FV  
To download the additional Lock rating system  
(when available)  
ALL  
V
L
D
TV-Y  
TV-Y7  
TV-G  
In the Lock menu, press or to set “System  
1
2
3
TV-PG  
TV-14  
TV-MA  
Lock” to “On”.  
Press or to select “RRT Setting”, then press  
: Block  
Press Enter to Lock or Unlock  
or ENTER.  
You can set the rating using age level and genre.  
If the TV is not storing the additional rating  
Age:  
system, the TV will begin downloading it, which  
may take some time to be completed.  
TV-Y  
: All children  
TV-Y7 : 7 years old and above  
Set your preferred content rating limits for the  
TV-G  
: General audience  
4
additional rating system.  
TV-PG : Parental guidance  
TV-14 : 14 years old and above  
TV-MA : 17 years old and above  
NOTE:  
You can only download the additional Lock rating  
system when your TV is receiving a digital signal.  
• When you download the additional rating system, it  
may take some time for the download to occur.  
• The Lock rating information and system are not  
determined or controlled by the TV.  
Genre:  
All  
FV  
V
: General  
: Fantasy Violence  
:Violence  
: Sex  
S
L
: Language  
: Dialogue  
• The standard Lock rating system is available  
whether your TV is receiving a digital signal or not,  
and will block both analog and digital programs.  
To set the restriction level using the standard Lock  
rating system, select “US Rating” in step 2.  
• The downloadable Lock rating system is an  
evolving technology, and availability, content, and  
format may vary.  
D
Press ///to select the desired rating, then  
press ENTER.  
MPAA Rating  
Off  
: None  
G
: All ages  
PG  
: Parental guidance  
PG-13 : Parental guidance less than 13 years old  
To clear the RRT settings  
R
: Under 17 years old parental guidance  
suggested  
In the Lock menu, press or to set “System  
1
2
Lock” to “On”.  
NC-17 : 17 years old and above  
X
: Adult only  
Press or to select “Reset RRT”, then press  
or ENTER.  
Press /to select the desired rating.  
The confirmation window will appear.  
Prees to select “Yes”, then press ENTER.  
Press EXIT to return to the normal screen.  
4
3
Your RRT Setting will clear.  
Lock function is activated now.  
NOTE:  
• The Lock function is activated only on programs  
and input sources that include a rating signal.  
To change the password  
In the Lock menu, press or to select “Change  
1
Password”, then press or ENTER.  
 
EN 22  
CC Mode will be change to”CC Off”,CC On” or “CC on  
Closed Caption  
Mute” by each pressing CCD on the remote control.  
WHAT IS CLOSED CAPTIONING?  
CC options  
This television has the capability to decode and  
display Closed Captioned television programs.  
Closed Captioning will display text on the screen  
for hearing impaired viewers or it will translate and  
display text in another language.  
When you have selected “Custom” as the display  
method, you can adjust the various setting listed  
below as follows:  
This feature is designed to customize Digital Caption  
Captions: This Closed Caption mode will display  
text on the screen in English or another language.  
Generally, Closed Captions in English are transmitted  
on CC1 and Closed Captions in other languages are  
transmitted on CC2.  
only.  
Select “Setup Closed Caption”, then press or  
1
2
3
4
ENTER.  
Press or to set “CC Mode” to “CC On” or “CC  
Text: The Text Closed Caption mode will usually fill  
1/2 of the screen with a programming schedule or  
other information.  
on Mute”.  
Press or to select “Option”, then press or  
ENTER.  
Select “Setup Closed Caption”, then press or  
1
Press or to select “Mode”, then press or ▶  
ENTER.  
to select “Custom”.  
Press or to set “CC Mode” to “CC On” or “CC  
2
Press or to select the desired item, then  
press or to change the setting.  
5
on Mute”.  
CC On: Captions will be displayed on the screen.  
CC on Mute: Only when you press MUTE,  
captions will be displayed.  
Picture  
Sound  
Time  
Setup  
Default  
Lock  
Channel  
CC Off: Captions will not be displayed on the screen.  
Mode  
Press or to select “Analog CC” or “Digital  
Font Style  
Font Size  
Font Edge Style  
Font Edge Color  
FG Color  
BG Color  
FG Opacity  
BG Opacity  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
3
CC”.  
When you select “Analog CC”, you can choose  
from CC1~4, Text1~4.  
When you select “Digital CC”, you can choose  
from Service1~6 and Off.  
Press or to select the desired Closed Caption  
4
You can select from among the following items  
and parameters.  
mode for both Digital and Analog Captions.  
Font Style:  
NOTE:  
• Depending on the broadcast signal, some  
Analog Captions will function with a Digital  
broadcast signal. This step prevent that two  
kind of captions are overlapping.  
Select display font style.  
Font Size:  
Select display font size.  
Font Edge Style:  
Select display font edge style.  
Font Edge Color:  
NOTE:  
• If the program or video you selected is not closed-  
captioned, no captions will display on-screen.  
• If text is not available in your viewing area, a black  
rectangle may appear on-screen. If this happens,  
set the CC Mode to “CC Off”.  
Select display font edge color.  
FG Color:  
Select foreground color.  
BG Color:  
• When selecting Closed Captions, the captioning  
will be delayed approx. 10 seconds.  
Select background color.  
FG Opacity:  
If no caption signal is received, no captions will  
appear, but the television will remain in the Caption  
mode.  
Select foreground opacity level.  
BG Opacity:  
• Misspellings or unusual characters may  
Select background opacity level.  
occasionally appear during Closed Captioning.  
This is normal with Closed Captioning, especially  
with live programs. This is because during live  
programs, captions are also entered live. These  
transmissions do not allow time for editing.  
NOTE:  
You can not set both “FG Color” and “BG Color” as a  
same color.  
• When Captions are being displayed, on-screen  
displays, such as volume and mute may be seen  
but may interfere with Closed Captions.  
• Some cable systems and copy protection systems  
may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is  
very poor, the closed caption decoder may not  
appear or may appear with strange characters or  
misspelled words. In this case, adjust the antenna  
for better reception or use an outdoor antenna.  
 
23 EN  
Full 100% (for PC mode only)  
Full will display the picture at the maximum size.  
Aspect Ratio  
You can change to a variety of picture sizes—  
Wide, Zoom, Cinema, Normal, Full 100% (for PC)  
and Point to Point (for PC).  
Selecting the picture size  
Point to Point (for PC mode only)  
Select “Picture Advanced setting Aspect  
Detects the resolution of the signal of the image and it  
will be shown on the screen with same amount of pixels.  
1
Ratio”.  
Press or to select the desired picture size, as  
2
described below.  
NOTE:  
• Selectable picture sizes may vary depending on the  
input source or broadcast signal.  
You can be select desired size of picture by  
pressing PICTURE SIZE on the remote control.  
Normal  
In some cases, this image will display the size of  
standard 4:3 with a black side bar.  
Wide (for 4:3 format programs)  
To fill the screen, the right and left edges are  
extended, however; the center of the picture remains  
near its former ratio.  
The top and bottom edges of the picture may be hidden.  
Zoom (for letter box programs with  
subtitles)  
To fill the width of the screen, it is extended  
horizontally. However; it is only slightly extended at the  
top and the bottom.  
The top and bottom edges of the picture may be hidden.  
A B C D E F G - - - - - - - - - - - - - - - -  
A B C D E F G - - - - - - - - - - - - - - - -  
Cinema (for letter box programs)  
The entire picture is uniformly enlarged—it is  
stretched the same amount both wider and taller  
(retains its original proportion).  
The top and bottom edges of the picture may be hidden.  
A B C D E F G - - - - - - - - - - - - - - - -  
 
EN 24  
Playback files  
Media Playback  
Press or to select Photo or Movie at Media  
1
2
3
You can enjoy viewing pictures and movies from  
your USB storage device.  
Selection and press ENTER.  
Press or to select “C”, then press ENTER.  
Connect the USB storage device into the USB  
1
Input terminal.  
Select folder or file with ///, and then start  
Press INPUT SELECT then press or to select  
2
the playback with ENTER.  
“Media”, then press ENTER.  
NOTE:  
You can playback the files with the following remote  
• Do not disconnect a USB storage device while it is  
being accessed. Doing so can damage the device  
or the files stored on the device. You can safely  
connect or disconnect the USB storage device  
when the TV is not in media mode.  
• Back up all the data in the USB storage device in  
case if data was lost due to unexpected accident.  
We do not assume any liability for the losses by  
misuse or malfunction.  
control buttons.  
Button Action  
Press to start the playback.  
ENTER  
Press to open the folder.  
Press to open the operation window.  
▌▌  
Press to pause the playback.  
• Not all USB storage devices are compatible with  
this TV.  
Press to start the playback or slideshow.  
Press to stop the playback.  
• The character that exceeds the display area is not  
displayed.  
• Do not use USB extension cable.  
• Playable files are JPEG (.jpg/.jpeg) and Motion  
JPEG (.avi (MJPEG format)).  
During the playback, press to select the next  
file.  
During the playback, press to select the  
previous file.  
Media Browser  
Media Selection  
Photo  
Movie  
File Selection  
C:\  
1
/
1
Return  
Photo7.jpg  
Resolution: 1920  
x
1080  
Size:  
Date:  
Time:  
2000Kbytes  
----  
--  
/
--  
:
/
--  
:
--  
--  
Photo2.jpg  
Photo6.jpg  
Photo8.jpg  
Photo9.jpg  
Photo1.jpg  
Information window  
NOTE:  
• The content will change in accordance with each  
media setting screen.  
 
25 EN  
Details of operation commands  
Icon Operation  
Play / Resume playback.  
▐▐  
Pause.  
Skip file to reverse / forward direction.  
Stop.  
Repeat playback.  
Press ENTER repeatedly to select desired  
repeat option.  
Show the playlist.  
Press or and ENTER to select the playback  
Show the file information.  
Rotate the image.  
Zoom in / out.  
Move the frame from the center position.  
Review / Fast playback.  
Select start point, then select end point.  
Repeat material between two selected points.  
Slow-motion Playback.  
One frame is advanced each time select this  
command.  
Direct jump by desired time.  
 
EN 26  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV  
system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is the  
direct path and the other is reflected by tall buildings, hills or other large  
objects. Changing the direction or position of the antenna may improve  
the reception.  
SNOW  
If the TV is located far from the TV station, in a fringe reception area where  
the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external antenna  
may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a loss of  
contrast in the picture. Changing the direction and position of the antenna  
or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST or  
BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
 
27 EN  
Troubleshooting  
Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer  
or service outlet if problems persist. Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
SYMPTOMS  
POSSIBLE SOLUTIONS  
Digital  
• Make sure the power cord is plugged in.  
broadcasting  
screen  
Try another AC outlet.  
• Check digital signal strength.  
TV does not  
operate.  
• Power is off, check fuse or circuit breaker.  
• Unplug unit for an hour, then plug it back  
in.  
problem.  
• Check all Cable TV connections.  
• Set Signal Type menu option to the  
Cable mode.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Check sound adjustments (VOL +/- or  
MUTE).  
No CATV  
reception.  
• Station or Cable TV system problems,  
Poor sound  
or no sound.  
try another station.  
• Check for sources of possible  
interference.  
• Check antenna connections, adjust or  
re-direct antenna.  
Horizontal or  
diagonal bars  
on screen.  
• Check for sources of possible  
interference.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Make sure Signal Type option is in the  
No reception  
above  
Poor picture • Check antenna or Cable TV  
appropriate mode.  
or no picture.  
connections, adjust antenna.  
• Check for sources of possible  
interference.  
• If using antenna, check UHF antenna  
connections.  
channel 13.  
• Batteries are weak, dead or inserted  
• Check picture control adjustments.  
incorrectly.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Station is weak, adjust antenna to  
receive desired station.  
• Remote is out of range, move closer to  
TV (within 15 feet).  
No Remote  
operation.  
Poor  
• Make sure Remote is aimed at sensor.  
• Confirm there are no obstructions  
between the Remote and the TV.  
• Make sure the power cord is plugged in.  
reception on  
some  
channels.  
• Check for sources of possible  
interference.  
• Sleep Timer is set.  
TV shuts off.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Power interrupted.  
• TV station experiencing problems or  
program tuned is not closed captioned.  
Try another channel.  
Poor color or • Check picture control adjustments.  
Closed  
no color.  
• Check antenna or Cable TV  
connections, adjust antenna.  
• Check for sources of possible  
interference.  
Caption is not  
activated.  
• Check Cable TV connection or VHF/UHF  
antenna, reposition or rotate antenna.  
• Set closed caption decoder in the menu.  
TV is not  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Cable TV company is scrambling signal.  
• Adjust antenna.  
• Select proper language in the menu  
options.  
shown in your  
language.  
Picture  
wobbles or  
drifts.  
BLOCK NOISE / PICTURE FREEZE  
Block noise or picture freeze may appear on the screen caused by weak signals, interference from automobile  
ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.  
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:  
1-800-289-0980  
WHEN CALLING CUSTOMER SERVICE PLEASE HAVE YOUR MODEL NUMBER READY  
OR WRITE TO:  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,  
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT  
 
EN 28  
Specifications  
GENERAL  
Power supply:  
AC 120V, 60Hz  
Power consumption:  
Operation: 133W  
Stand by: 0.5W  
12.7kg (28.0 lbs)  
Width: 986.0 mm(38-13/16 inches)  
Height: 667.0mm(26-1/4 inches)  
Depth: 236.9mm(9-5/16 inches)  
5˚C - 40˚C  
Less than 80% RH  
Weight:  
Dimensions:  
Operating temperature:  
Operating humidity:  
Type:  
Display method:  
Number of Pixels:  
Broadcasting system:  
1016.1mmV(40”class/40.00 diagonal)  
Transmission TFT color LCD panel  
1920 (H) x 1080 (V)  
US System M  
ATSC standard (8VSB), QAM  
Receiving channels:  
VHF  
2-13  
UHF  
14-69  
CATV 14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-135 (100)-(135)  
01 (4A)  
Tuner type:  
Inputs:  
Frequency synthesized  
Video: (RCA) 1 V (p-p), 75 ohms  
Audio:  
(RCA) –8 dBm/50k ohms  
Component video:  
(Y) 1 V (p-p), 75 ohms  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms  
HDMI: HDMI compliant (type A connector)  
HDCP compliant  
E-EDID compliant  
Suggested scan rates: 480p, 480i, 720p,1080i,1080p  
HDMI Audio: 2-channel PCM  
32/44.1/48 kHz sampling frequency  
16/20/24 bits per sample  
PC Monitor: Mini-Dsub 15pin  
Antenna:  
Audio:  
VHF/UHF In 75 ohms coaxial  
0-600mVrms/1k ohm  
Outputs:  
Digital audio out:  
0.5 V (p-p), 75 ohms terminated  
Speakers:  
Audio output power:  
ACCESSORIES  
40.6 mm × 121.9 mm (1-5/8 inches × 4-13/16 inches), 8 ohms × 2  
8.0W + 8.0W  
Remote control  
Batteries (AAA) × 2  
AC Cord  
Stand  
Screws × 6  
• for Stand (4×12mm (5/32 × 15/32 inches)) × 3  
• for Frame Stand (4×35mm (5/32 × 1-23/64 inches)) × 3  
Frame Stand  
Designs and specifications are subject to change without notice.  
 
29 EN  
limited  
WARRANTY  
40” CLASS LCD HDTV  
ORION warrants this product to be free from manufacturing defects in material and workmanship under  
normal use and conditions for a period of 1 year from date of original purchase in the United States.  
Should service be necessary under this warranty for any reason due to a manufacturing defect or  
malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service only by an  
ORION authorized Independent Service Center at no charge. Also, if an original part fails due to manufacturing defect  
in material and workmanship within one year from date of original purchase we will replace the defective part,  
provided the defect or malfunction is verified along with dated proof of purchase.  
There are ORION authorized Independent Service Centers located throughout the country. For the one  
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service  
Centers in your area please call - 1-888-296-7466 for assistance.  
Note:This warranty is void if the product is:  
(a) Damaged through negligence, misuse, abuse, or accident.  
(b) Used in a commercial application or rentals.  
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect  
warranty repairs to the class of product or by the ORION Factory Service Center.  
(d) Damaged because it is improperly connected to the equipment of other manufacturers.  
This warranty does not cover:  
(a) Damage to equipment not properly connected to the product.  
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or  
ORION Factory Service Center.  
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow  
operating instructions provided with the product.  
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s  
manual.  
(e) Signal reception problems caused by external antenna or cable systems.  
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER  
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED  
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A  
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL  
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS  
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR  
ANY PARTICULAR PURPOSE AND USE.  
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE  
USE OF THIS PRODUCT.  
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE  
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF  
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
 
EN 30  
Memo  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
 

QSC Audio Stereo Amplifier TD 000271 01 User Guide
RCA Flat Panel Television 20F420T User Guide
Rheem Water Heater HE45 160 User Guide
Ricoh Printer 4960 DN1 User Guide
Roku MP3 Player Wi Fi Music System User Guide
Russound Stereo Amplifier CA64 User Guide
Samson Stereo Amplifier PA324 User Guide
Samsung MP3 Player VY H200 User Guide
Sea Sea Digital Camera 860G User Guide
SECO LARM USA Security Camera VB HC1 User Guide